-
Excavator Undercarriage Parts PC60 Front Idler For KOMATSU
Our Idler is made of alkaline phenolic resin sand or water glass sand. The wheel and rail surface is heated by matrix normalizing+medium frequency induction. The surface hardness achievable HRC48-58 and the hardening depth is 4-6mm (HRC45) the above.It has rugged high impact and proper wear resistance.
-
Excavator Undercarriage Parts R60 Front Idler For HYUNDAI
Our Idler is made of alkaline phenolic resin sand or water glass sand. The wheel and rail surface is heated by matrix normalizing+medium frequency induction. The surface hardness achievable HRC48-58 and the hardening depth is 4-6mm (HRC45) the above.It has rugged high impact and proper wear resistance.
-
Excavator Undercarriage Parts EX60 Front Idler For HITACHI
Our Idler is made of alkaline phenolic resin sand or water glass sand. The wheel and rail surface is heated by matrix normalizing+medium frequency induction. The surface hardness achievable HRC48-58 and the hardening depth is 4-6mm (HRC45) the above.It has rugged high impact and proper wear resistance.
-
Excavator Undercarriage Parts EX55 Front Idler For HITACHI
Our Idler is made of alkaline phenolic resin sand or water glass sand. The wheel and rail surface is heated by matrix normalizing+medium frequency induction. The surface hardness achievable HRC48-58 and the hardening depth is 4-6mm (HRC45) the above.It has rugged high impact and proper wear resistance.
-
Excavator Undercarriage Parts PC20 PC30 PC40 Front Idler For KOMATSU
The Komatsu excavator track idler assembly includes a fuel injection valve, a plunger shaft, a grease cylinder, a spring, a front baffle, a guide wheel and a guide wheel bracket.
-
Excavator Undercarriage Parts PC100 Front Idler For KOMATSU
Our Idler is made of alkaline phenolic resin sand or water glass sand. The wheel and rail surface is heated by matrix normalizing+medium frequency induction. The surface hardness achievable HRC48-58 and the hardening depth is 4-6mm (HRC45) the above.It has rugged high impact and proper wear resistance.
-
Excavator Undercarriage Parts PC300 Front Idler For KOMATSU
Our Idler is made of alkaline phenolic resin sand or water glass sand. The wheel and rail surface is heated by matrix normalizing+medium frequency induction. The surface hardness achievable HRC48-58 and the hardening depth is 4-6mm (HRC45) the above.It has rugged high impact and proper wear resistance.
-
Excavator Undercarriage Parts EX300 Front Idler For HITACHI
Our Idler is made of alkaline phenolic resin sand or water glass sand. The wheel and rail surface is heated by matrix normalizing+medium frequency induction. The surface hardness achievable HRC48-58 and the hardening depth is 4-6mm (HRC45) the above.It has rugged high impact and proper wear resistance.
| Phone : | +86-15559008366 |
|---|---|
| Email : | KOBE@F-TIMES.NET |