Excavator Undercarriage Parts PC400 Sprocket For KOMATSU
A sprocket is a type of wheel with cog-type buckle sprocket, which is used to mesh with a block with a precise pitch on a chain link or cable. PC400 sprocket is mainly used in Komatsu excavators and bulldozers
Excavator Undercarriage Parts EX300 Sprocket For HITAHCI
The compact structure of EX300 sprocket can realize large transmission ratio, high efficiency and long service life. Chain drive has the characteristics of high sprocket teeth and chains participating in meshing at the same time, large sprocket cogging arc and small gear stress concentration. Therefore, the EX300 chain drive has a large load carrying capacity and the sprocket surface wear is relatively light.
Excavator Undercarriage Parts EX400 Sprocket For HITACHI
EX400 sprocket drive has extremely high speed and low noise. In chain transmission, the processing accuracy and installation accuracy of chain and stainless steel sprocket and the accuracy of center distance are lower than the requirements of gears. It is easier to change the parameters (transmission ratio, center distance, etc.) of the existing chain transmission to achieve simple installation and maintenance.
Excavator Undercarriage Parts PC300 Sprocket For KOMATSU
The sprocket is divided into a driving sprocket and a driven sprocket. The driving sprocket is mounted on the engine output shaft through a spline; the driven sprocket is mounted on the motorcycle driving wheel and transmits power to the driving wheel through the chain. Generally The driving sprocket is smaller than the driven sprocket, which can reduce the speed and increase the torque.
Excavator Undercarriage Parts SK350 Sprocket For KOBELCO
SK350 sprocket is the basic transmission element in the excavator. The quality of the sprocket directly affects the noise, smoothness and service life of the transmission. SK350 sprocket has performance advantages such as high load capacity, high tooth surface hardness, high precision, high speed, high reliability and high transmission efficiency.
Excavator Undercarriage Parts E330 Sprocket For CAT
After the standard heat treatment of the drive wheel blank of our sprocket, the hardness of the substrate reaches above HB235, and the drive teeth are subjected to medium frequency induction hardening and low temperature tempering. The surface hardness can reach HRC48-54, and the hardening depth is higher than 5-10mm (HRC45). It not only provides accurate power under harsh working conditions, but also has excellent wear resistance and has the effect of extending product life and reducing customer costs.
Excavator Undercarriage Parts EX200 Sprocket For HITACHI
The key to excavator sprocket manufacturing is the setting of the sprocket processing technology. According to the different uses of the sprocket, different processing techniques are used in production to control the gear's load carrying capacity, accuracy level and service life. The quality of the sprocket of the excavator directly affects the noise, stability and service life of the equipment.
Excavator Undercarriage Parts E320 Sprocket For CAT
As an important part of the excavator, the sprocket is indispensable for the entire excavator. With the development of science and technology, sprocket manufacturing technology and equipment are also further developed. High efficiency, high precision, automation, intelligence, information technology and clean processing are the development trends of sprocket processing technology and equipment in the future.
Excavator Undercarriage Parts PC200 Sprocket For KOMATSU
Sprocket transmission is a mechanical transmission that uses the teeth of two gears to mesh with each other to transmit power and motion. According to the relative position of the sprocket axis, it can be divided into parallel-shaft cylindrical gear transmission, intersecting-shaft conical sprocket transmission and staggered-axis helical gear transmission. With compact structure, high efficiency, long life and so on.