MADE IN CHINA

EXCAVATOR UNDERCARRIER PARTS

EXCAVATOR ENGIN PARTS

  • 20x50 Size Track Bolt For Excavator Sprocket Parts

    20x50 Size Track Bolt For Excavator Sprocket Parts

    Track bolts are a type of fastener consisting of a head and a screw (a cylinder with external threads). They need to cooperate with a nut to fasten two parts with through holes. This type of connection is called a bolted connection. If the nut is unscrewed from the bolt, the two parts can be separated, so the bolt connection is a detachable connection.

  • 18x50 Size Track Bolt For Excavator Sprocket Parts

    18x50 Size Track Bolt For Excavator Sprocket Parts

    40Cr heat treatment+intermediate frequency processingto ensure the hardness and tension of the bolt. A wide range of track shoe bolts, track roller bolts, sprocket bolts etc., to meets the needs of most chassis armor and bucket parts.

  • 16x50 Size Track Bolt For Excavator Sprocket Parts

    16x50 Size Track Bolt For Excavator Sprocket Parts

    40Cr heat treatment+intermediate frequency processingto ensure the hardness and tension of the bolt. A wide range of track shoe bolts, track roller bolts, sprocket bolts etc., to meets the needs of most chassis armor and bucket parts.

  • Excavator Undercarriage Parts PC400 Sprocket For KOMATSU

    Excavator Undercarriage Parts PC400 Sprocket For KOMATSU

    A sprocket is a type of wheel with cog-type buckle sprocket, which is used to mesh with a block with a precise pitch on a chain link or cable. PC400 sprocket is mainly used in Komatsu excavators and bulldozers

  • Excavator Undercarriage Parts EX300 Sprocket For HITAHCI

    Excavator Undercarriage Parts EX300 Sprocket For HITAHCI

    The compact structure of EX300 sprocket can realize large transmission ratio, high efficiency and long service life. Chain drive has the characteristics of high sprocket teeth and chains participating in meshing at the same time, large sprocket cogging arc and small gear stress concentration. Therefore, the EX300 chain drive has a large load carrying capacity and the sprocket surface wear is relatively light.

  • Excavator Undercarriage Parts EX400 Sprocket For HITACHI

    Excavator Undercarriage Parts EX400 Sprocket For HITACHI

    EX400 sprocket drive has extremely high speed and low noise. In chain transmission, the processing accuracy and installation accuracy of chain and stainless steel sprocket and the accuracy of center distance are lower than the requirements of gears. It is easier to change the parameters (transmission ratio, center distance, etc.) of the existing chain transmission to achieve simple installation and maintenance.

  • Excavator Undercarriage Parts PC300 Sprocket For KOMATSU

    Excavator Undercarriage Parts PC300 Sprocket For KOMATSU

    The sprocket is divided into a driving sprocket and a driven sprocket. The driving sprocket is mounted on the engine output shaft through a spline; the driven sprocket is mounted on the motorcycle driving wheel and transmits power to the driving wheel through the chain. Generally The driving sprocket is smaller than the driven sprocket, which can reduce the speed and increase the torque.

  • Excavator Undercarriage Parts SK350 Sprocket For KOBELCO

    Excavator Undercarriage Parts SK350 Sprocket For KOBELCO

    SK350 sprocket is the basic transmission element in the excavator. The quality of the sprocket directly affects the noise, smoothness and service life of the transmission. SK350 sprocket has performance advantages such as high load capacity, high tooth surface hardness, high precision, high speed, high reliability and high transmission efficiency.

  • Excavator Undercarriage Parts E330 Sprocket For CAT

    Excavator Undercarriage Parts E330 Sprocket For CAT

    After the standard heat treatment of the drive wheel blank of our sprocket, the hardness of the substrate reaches above HB235, and the drive teeth are subjected to medium frequency induction hardening and low temperature tempering. The surface hardness can reach HRC48-54, and the hardening depth is higher than 5-10mm (HRC45). It not only provides accurate power under harsh working conditions, but also has excellent wear resistance and has the effect of extending product life and reducing customer costs.

  • 1
  • 2
  • 3
  • Get the latest price? We'll respond as soon as possible(within 12 hours)