MADE IN CHINA

EXCAVATOR UNDERCARRIER PARTS

EXCAVATOR ENGIN PARTS

  • Excavator Undercarriage Parts E320 Front Idler For CAT

    Excavator Undercarriage Parts E320 Front Idler For CAT

    Our Idler is made of alkaline phenolic resin sand or water glass sand. The wheel and rail surface is heated by matrix normalizing+medium frequency induction. The surface hardness achievable HRC48-58 and the hardening depth is 4-6mm (HRC45) the above.It has rugged high impact and proper wear resistance.

  • D65 Front Idler Assy Parts For Bulldozer Undercarriage

    D65 Front Idler Assy Parts For Bulldozer Undercarriage

    Our Idler is made of alkaline phenolic resin sand or water glass sand. The wheel and rail surface is heated by matrix normalizing+medium frequency induction. The surface hardness achievable HRC48-58 and the hardening depth is 4-6mm (HRC45) the above.It has rugged high impact and proper wear resistance.

  • Excavator Undercarriage Parts SK350 Front Idler For KOBELCO

    Excavator Undercarriage Parts SK350 Front Idler For KOBELCO

    Our Idler is made of alkaline phenolic resin sand or water glass sand. The wheel and rail surface is heated by matrix normalizing+medium frequency induction. The surface hardness achievable HRC48-58 and the hardening depth is 4-6mm (HRC45) the above.It has rugged high impact and proper wear resistance.

  • Excavator Undercarriage Parts EX200 Front Idler For HITACHI

    Excavator Undercarriage Parts EX200 Front Idler For HITACHI

    Our Idler is made of alkaline phenolic resin sand or water glass sand. The wheel and rail surface is heated by matrix normalizing+medium frequency induction. The surface hardness achievable HRC48-58 and the hardening depth is 4-6mm (HRC45) the above.It has rugged high impact and proper wear resistance.

  • Excavator Undercarriage Parts EX400 Front Idler For HITACHI

    Excavator Undercarriage Parts EX400 Front Idler For HITACHI

    Our Idler is made of alkaline phenolic resin sand or water glass sand. The wheel and rail surface is heated by matrix normalizing+medium frequency induction. The surface hardness achievable HRC48-58 and the hardening depth is 4-6mm (HRC45) the above.It has rugged high impact and proper wear resistance.

  • Excavator Undercarriage Parts PC400 Front Idler For KOMATSU

    Excavator Undercarriage Parts PC400 Front Idler For KOMATSU

    Our Idler is made of alkaline phenolic resin sand or water glass sand. The wheel and rail surface is heated by matrix normalizing+medium frequency induction. The surface hardness achievable HRC48-58 and the hardening depth is 4-6mm (HRC45) the above.It has rugged high impact and proper wear resistance.

  • Excavator Undercarriage Parts E330 Front Idler For CAT

    Excavator Undercarriage Parts E330 Front Idler For CAT

    Our Idler is made of alkaline phenolic resin sand or water glass sand. The wheel and rail surface is heated by matrix normalizing+medium frequency induction. The surface hardness achievable HRC48-58 and the hardening depth is 4-6mm (HRC45) the above.It has rugged high impact and proper wear resistance.

  • Excavator Undercarriage Parts PC200 Front Idler For KOMATSU

    Excavator Undercarriage Parts PC200 Front Idler For KOMATSU

    Our Idler is made of alkaline phenolic resin sand or water glass sand. The wheel and rail surface is heated by matrix normalizing+medium frequency induction. The surface hardness achievable HRC48-58 and the hardening depth is 4-6mm (HRC45) the above.It has rugged high impact and proper wear resistance.

  • Excavator Undercarriage Parts EX100 EX120 Front Idler For HITACHI

    Excavator Undercarriage Parts EX100 EX120 Front Idler For HITACHI

    The Idler body is a casting part, and the wheel body has durability and rust resistance after special heat treatment. The Idler with the hardness of the wheel body diameter and the design of the guide shaft and the reasonable outer diamete to increases the wear life.

  • 1
  • 2
  • Get the latest price? We'll respond as soon as possible(within 12 hours)