MADE IN CHINA

EXCAVATOR UNDERCARRIER PARTS

EXCAVATOR ENGIN PARTS

  • China hex nut factory
  • China hex nut factory
  • China hex nut factory
  • China hex nut factory

China Hex Bolt Parts For Excavator Bulldozer

Brand :F-Times,AFA,UTD

Product origin :Quanzhou Fujian China

Delivery time :30 days

Supply capacity :20000pcs

There are many names for bolts, and everyone may call them differently. Some people call them screws, some call them bolts, and some call them fasteners. Although there are so many names, they all have the same meaning, they are all bolts. Bolts are a common term for fasteners.
40Cr heat treatment+intermediate frequency processingto ensure the hardness and tension of the bolt.
A wide range of track shoe bolts, track roller bolts, sprocket bolts etc., to meets the needs of most chassis armor and bucket parts.

Product Information
 




Brand Name F-Times,AFA,UTD
Products TypeTrack Bolt
Place of ProductionQuanzhou Fujian China
Use
Excavator, Bulldozer, ect
Technology
Forging Casting/Smooth Finish
FeatureDurable, Strong
Material45#,40Cr, 20CrMnTi
Color Commonly use color, Customized
MOQ 10pcs
PackageCustomized
Shipment FOB

 

Product Information
 
  


Track bolt inspection

 

1. Inspection of adhesion strength of track bolt plating

  

There are many methods to evaluate the adhesion between the coating and the base metal, usually the following: 1. friction polishing test; 2. file method test; 3. scratch method; 4. bending test; 5. thermal shock test; 6. extrusion law.

  

2. Inspection of corrosion resistance of track bolt plating

  

The test methods for corrosion resistance of coatings are: atmospheric exposure test; neutral salt spray test (NSS test); acetate salt spray test (ASS test), copper accelerated acetate spray test (CASS test); and corrosion paste corrosion test (CORR test) and solution drip corrosion test; immersion test, immersion corrosion test, etc.

  

3.Surface inspection and inspection methods of track bolts

  

There are two types of track bolt surface inspections. One is inspection before the screws are produced without plating, and the other is inspection after the screws have been plated, that is, after the screws are hardened, the screws are surface-treated.

  

4.Other inspection of track bolts

  

After the track bolts are produced and not plated, we check the dimensions, tolerances and other aspects of the screws. See if it meets national standards or customer requirements. After the surface of the screw is treated, the screws we plated are inspected, mainly to check the color of the plating and whether there are any bad screws. 

 China hex nut factory

  

 

 

Product Process
 
 

               China hex nut factory

China hex nut factory

The difference between the mechanical performance requirements of track bolts and nuts is that:

 

1. The mechanical properties of the nut mainly depend on the hardness of the nut, the height of the nut, and the wall thickness of the nut. Therefore, the material requirements are not high. Of course, if the nut has toughness requirements, higher-level materials should also be used, such as Chemical fastener nuts require higher grades for toughness requirements.

 

2.The plasticity index required for track bolts, the higher the performance level, only higher-level materials can be achieved. Low-level materials can only meet the strength requirements by reducing the tempering temperature, but they cannot meet the requirements of plasticity and toughness. In the test, the brittle fracture was judged as unqualified. Steel structural bolts also specified the maximum tensile strength, in order to ensure the plastic toughness of the bolts.

                       

China hex nut factory

China hex nut factory

China hex nut factory

 

China hex nut factory

 


China hex nut factory


China hex nut factory

Get the latest price? We'll respond as soon as possible(within 12 hours)
close left right