Excavator Undercarriage Parts PC200 Front Idler For KOMATSU?>
Product origin :Quanzhou Fujian China
Delivery time :30 days
Supply capacity :20000 pcs
Our Idler is made of alkaline phenolic resin sand or water glass sand.
The wheel and rail surface is heated by matrix normalizing+medium frequency induction.
The surface hardness achievable HRC48-58 and the hardening depth is 4-6mm (HRC45) the above.It has rugged high impact and proper wear resistance.
|Products Type||Front Idler|
|Place of Production||Quanzhou Fujian China|
|Use||Excavator, Bulldozer, ect|
|Technology||Forging Casting/Smooth Finish|
|Color||Commonly use color, Customized|
How to extend the life of the front idler of excavator
1. Master the operating specifications of the front idler of the excavator
For the operator of the front idler wheel of the excavator, he should master the operation skills of the equipment and correctly operate the front idler wheel of the excavator in accordance with the safety technical specifications. "Sihui" (use, maintenance, inspection, and troubleshooting). Not only can the equipment be opened, but also the equipment will be checked and maintained, so that the life of the front idler of the excavator can be longer.
2. Reduce the impact of the environment on the front idler of the excavator
Many users ignore the impact of environmental climate on the life of front idler wheels of excavators. It is well known that most of the construction machinery and equipment are open-air operations. Depending on the project to be connected, the place of work will change, and the equipment is easily affected by factors such as temperature, environment and climate of the site. If it is a machine that works on a fixed site for a long time, it is best to have a parking room (shed) or cover it to minimize the damage caused by sunlight and rain. Therefore, corresponding machine protection measures should be taken according to the climatic environment.
3. Don't neglect maintenance due to tight schedule
Construction units should not ignore the importance of maintenance because of tight schedules. Regardless of the maintenance of construction machinery, mistakenly believe that as long as the equipment runs normally without major faults, you can rest assured; failure to perform timely maintenance will cause great hidden dangers. Many major accidents are accumulated over time like this. It is too late when the accident actually occurs. Therefore, we cannot forget the maintenance of the idler wheel of the excavator for the project.
4. Use appropriate maintenance methods
Can't wait to repair the idler wheel of the excavator when it has to be repaired. When a fault is found, it should be removed in time for repair. The following methods can be used for maintenance practice: First, parts replacement, and many parts on construction machinery, such as bulldozers, track pins of excavators, diesel cylinder liners, etc., often bear unidirectional loads during operation, causing uneven wear. If the position of parts subjected to unbalanced load is changed in a timely manner so that their wear is balanced, the service life can be extended. The second is the use of advanced brush plating and adhesive repair technology, which can also quickly and cost-effectively repair failed parts, such as wear-resistant surfacing, spray diamond plating, magnetic plating, laser plating, etc.