Excavator Undercarriage Parts PC200 Track Link For KOMATSU?>
Product origin :Quanzhou Fujian China
Delivery time :30 days
Supply capacity :20000 pcs
The PC200 track link forged with 35MnB special steel, and the technology of strengthening structure and advanced quenching heat treatment hardening process make the product excellent in toughness and wear resistance, continuous, no cracking, no bending.
|Products Type||Track Link|
|Place of Production||Quanzhou Fujian China|
|Use||Excavator, Bulldozer, ect|
|Technology||Forging Casting/Smooth Finish|
|Color||Commonly use color, Customized|
Maintenance of excavator track links
1. Inspection: In the process of stopping the use of the excavator, we must carefully check the screws of each part to see if the track link of the excavator is loose, and the cables, speed reducers, track pads, wire rope, Whether the system and other components are abnormally worn or damaged.
2. Cleaning: It should also ensure that the surface of the excavator is cleaned thoroughly to prevent dust and foreign objects on the excavator crawler link from entering the inside, affecting the normal operation of the excavator. And eliminate our production risks, so that our safety performance is further improved.
3. Lubrication: Good lubrication can reduce mechanical failure and wear during operation. Lubrication must be performed strictly in accordance with the amount, duration and type of oil specified in the excavator's manual.
Deviation requirements for installation position of excavator chain link
The end faces of two sprocket wheels in the same transmission assembly should be in the same plane. When the center distance of the sprocket wheels is less than 0.5 meters, the deviation can be 1 mm; when the center distance of the sprocket wheels is more than 0.5 meters, the deviation can be 2 mm. However, there must not be friction on the side of the sprocket teeth. If the two wheels are offset too much, it is easy to cause off-chain and accelerated wear. Care must be taken to check and adjust the offset when replacing the sprocket.